Tracer Dream 100V Series MPPT Solar Charge Controller
Tracer Dream 100V TU Series adopts MPPT technology. Max.100V solar input, 12V/24V auto work. It's also ran by 32 bits CPU, so stability and speed can be guaranteed. Based on the synchronous rectifier technology, the transfer efficiency of circuit can be increased up to 98.5%and the Pmax tracking accuracy up to 99. 5%. So our MPPT can trace the accurate Pmax in the shortest time (10~20s) , even when the sunlight changes rapidly. It can perfectly handle extreme weather or weak sunlight.It adopted by common negative design and it can start from solar, Widely used in RV, ship and so on.
Click here to download data
Appearance
Golden Ratio Asymmetric Design
The controller adopts asymmetrical design, and the LCD screen is located at the golden section, with a harmonious proportion and beautiful appearance. It' s natural to put it anywhere in your home or in RVs.
USB
Free USB Charging
Support the maximum 1A charging current, charge your mobile device faster 20A , 30A with 1 USB port
Main control chip
ARM architecture, high-quality 32-bit main control chip, improve charging efficiency comprehensively
Make your system more stable and efficient, the main control chip adopts Stmicroelectronics, and the other components adopt Samsung and Fenghua Hi-tech components to ensure the stability and life of the controller
The running program of the upgradeable frame structure guarantees the low loss of the controller and makes it more efficient.
Eficiente
High Tracking Accuracy
High Conversion Efficiency
TD series controllers use the latest MPPT algorithm to improve tracking efficiency and speed, reduce energy It can improve the utilization ratio of PWM controller by 20% to 30%.
Heat dissipation
Distinctive heat
dissipation character
This time, we also made a brand-new upgrade design for the TD100V series heat dissipation system, and the back MOS tubes are evenly distributed.
While ensuring a stylish and simple appearance, the heat dissipationis further improved.
Protect
Power Limited Protection
When the power of solar charging exceeds the rated power of the controller, Ldsolar controller will limit the input power, and work at the rated power of controller without damaging the controller
In the system that the MPPT controller of Ldsolar is installed, the power of solar panel can be more than the rated power of controller. But cannot exceed 2 times.
Solicitud
Support lithium battery, start from solar
Application is wider, especially in many fields such as lithium battery systems, RVS , communication base stations, etc.
Fast Tracking
Good Low Light
Fast Trackin
Under low light conditions, Ldsolar controller can still track to the MPP quickly.
In the case of light changes during the day, It can track in time and accurately.
It can achieve good balance between low disturbance amplitude and quick response and also can identify the MPP in the case of multiple peaks.
| Modelo | TD2210TU | TD2310TU | TD2410TU |
| System Voltage | 12V/24V DC auto | ||
| Working voltage range | 8~32V | ||
| Max.PV open circuit voltage | 100V（Min.working temperature）95V（25℃） | ||
| MPPT voltage range | （Battery voltage+2V）~75V | ||
| Discharge circuit voltage drop | ≤0.25V | ||
| Self-consumption | <23ma | ||
| Rated charge current | 20A | 30A | 40A |
| Rated discharge current | 20A | 30A | 40A |
| Max.PV input power | 260W/12V 520W/24V | 390W/12V 780W/24V | 520W/12V 1040W/24V |
| Grounding | Common positive | ||
| Battery type | Sealed(Default)/Gel/Flood/Lithium | ||
| LVD※* | 11.0V ADJ 9V...12V ; x2/24V ; x4/48V | ||
| LVR※* | 12.6V ADJ 11V...13.5V ；x2/24V ; x4/48V | ||
| Float Voltage※* | 13.8V ADJ 13V... 15V ; x2/24V ; M/48V | ||
| Boost Voltage※* | 14.4V ADJ 13V...17V ；x2/24 ; x4/48V | ||
| battery voltage less than 12.6v auto boost 2hours | |||
| Battery Over Voltage Protection | 16.5V ; x2/24V ; x4/48V | ||
| USB Output | 5VDC/1A 1个 | ||
| Temperature Consumption# | For 12Vsystem:-24mV /°C ;x2/24V ; x4/48V | ||
| RS485 interface | Optional | ||
| Relative humidity | ≤95%, N.C. | ||
| WorkingTemperature | -20°C~+50°C℃(Product can work continuously at full load) | ||
| LCD temperature range | -20°C~+70°C | ||
| Grado de impermeabilidad | IP32 | ||
| Mounting hole size | Φ5mm | ||
| Terminals | 10mm²/8AWG | 16mm²/6AWG | 25mm²/4AWG |
| Peso | 0.87kilogramo | 1.2kilogramo | 1.7kilogramo |
| Overall dimension(mm) | 200*127*54mm | 195*183*54mm | 232.5*200.1*54mm |
Tracer Dream 100V Series MPPT Solar Charge Controller Data Download>>